 TENSION SENSORS
for Paper and Converting applications
Wide range
High accuracy and repeatability
High overload limit
On-line sensing through DTI
Suitable for both live and dead roller applications.
Dynaspede Load Cells are full-bridge strain gauge-based tension sensors, designed for direct on-line sensing of tension in moving paper, films, foils, wires and cables. They are characterized by extreme linearity, near-zero hysteresis and overload capabilities to withstand rigorous industrial duty applications with electronics to match from Dynaspede range of tension indicators, tension controllers… analog or DSP based. |
| |
| SW TYPE LOAD CELLS |
| |
 |
 |
| |
| SW load cells are of compact design available in foot, flange and plate(side wall) mounting options. Space effective. Suitable for both live and dead shaft rollers. Ideal for low to medium tension applications. Built-in low friction self-aligning bearings |
| |
 |
|
| UPB TYPE LOAD CELLS |
| |
Under Pillow Block (UPB) series load cells are of sealed construction, designed for demanding industrial applications
Suitable for live and driven shafts. Ideal for high tension, high speed applications. |
| |
 |
| |
| Selection Procedure |
| |
|
You may order by description or by specifying the code of each model as illustrated in the example.
ELECTRICAL SPECIFICATIONS
The specifications are common to both types of load cells. |
| |
| Bridge Resistance |
|
350 Ω (nominal) ± 2 Ω |
| Standard Output ±10% |
|
11 mV |
| Sensitivity |
|
1.1 mV/V |
| Measurement Limit |
|
150% of rated load |
| Ambient |
|
45 °C |
| Bridge Excitation - Max |
|
10 Vdc |
| Combined Accuracy (Hysterisis, Linearity, Repeatability) |
|
Better than ± 0.5% of rated output |
| Standard Accessories |
|
Connecting cable 8 m, Spare screws,“V” Ring, One Locking ring with a pair of load cells |
|
| |
 |
| |
 DIGITAL TENSION MONITOR
Digital Tension Indicators (DTI), used with Dynaspede Load Cells is admirably suited for on-line sensing and indication of web tension.The unit outputs a signal of 0-0VDC/4-20mA, in terms of web tension. They are available for both face mounting and for independent mounting on the control panels. |
| |
| SUPPLEMENTARY VERSIONS |
| |
|
|
